So you've now connected to wireless device to your WiFi Connect, but now you need to connect to to a WiFi signal. By following the simple steps below, we'll have you connected in no time!
Step 1: Make sure you WiFi enabled device is connected to your Winegard WiFi Connect (See "Winegard WiFi Connect - How to connect" for details on how to do that)
Step 2: One at the WiFi Connect main page, scroll down until you see the "Internet Access" portion and select WiFi only (This step only applies to WiFi Connect 4G/LTE only.)
Step 3: Click on "Scan for WiFi" to have your WiFi Connect scan for any open WiFi signals
Step 4: It may take a few moments to the WiFi Connect to scan and locate nearby WiFi signals
Step 5: Once scanning is complete, select the WiFi source you would like your WiFi Connect to connect to.
Step 6: In the following window, enter the password to connect to the WiFi if required.
Note: Some networks will instead display a "splash page" when connecting instead of using a password
Step 7: After a few moments, your WiFi Connect should be connected to the selected network. If not, try selecting a different network, or try re-entering the password